Price: $15.97
(as of Dec 18, 2024 08:04:43 UTC – Details)
Bondo Original Filler instructions:
Step 1: Clean all surfaces with soap and water followed by a low VOC compliant cleaner. Allow to dry.
Step 2: Sand the damaged area with 80 grit sandpaper to remove all paint, primer, and rust down to bare metal. Sand 1-2 inches beyond damaged area. Clean again with a low VOC compliant cleaner.
Step 3: Stir the filler before using. Knead the hardener tube. For a 3-inch diameter puddle of filler, squeeze out a 3” long strip of hardener. This is the maximum recommended amount to mix at any given time for optimal application. Mix thoroughly to a uniform color on a clean, non-porous surface. When product is mixed, the working time is 3-4 minutes. Do not add hardener directly into the filler container.
Step 4: Spread an initial thin layer of the mixed filler over the repair area using firm pressure to ensure maximum adhesion. Apply additional layers of filler as needed. Allow filler to cure 20 minutes.
Step 5: Rough shape the filler with 80 grit sandpaper. Finish sand with 180 grit and finer. Featheredge the repair. Wait 45 minutes and apply 2-3 coats of primer to cover the repair area.
Step 6: Apply Bondo Glazing and Spot Putty to fill in small imperfections and re-prime with 2-3 coats. Follow paint manufacturer’s recommendation for priming and final finishing.
For best results apply at 45°F (7°C) or above. Do not put mixed filler back in the can. Clean tools with acetone or lacquer thinner.
Is Discontinued By Manufacturer : No
Product Dimensions : 8.6 x 4.3 x 6.5 inches; 6.4 ounces
Item model number : 262
Department : Patching & Repair
Date First Available : April 1, 2004
Manufacturer : 3M AAD Consumer (Domestic)
ASIN : B000WZCNBC
Country of Origin : USA
ORIGINAL FORMULA for repairing dents, dings, holes, large rusted areas and scratches in vehicles
TWO-PART lightweight compound mixes easily and spreads smoothly
SPREAD EASY and cures in only 20 minutes for same day repairs
FORMULATED TO BE NON-SHRINKING
SUITABLE FOR wood, steel, aluminum, fiberglass, and concrete
Lightweight and sands easily
Can be shaped days later
Formulated to be a non-shrinking, non-reactive and permanently durable material
Restores chips quickly and easily
Repairs dents, patches holes and leaks
Customers say
Customers find the auto accessory easy to use and a good value for money. They say it works well, sets up quickly, and is durable once dry. Many find it sandable and smooth to finish with. However, opinions differ on its utility and hardening speed.
AI-generated from the text of customer reviews
Reviews
There are no reviews yet.