MedeaWiz® DV-S4 Sprite® Loopin…

Price: ~~$164.97~~ - $154.98
(as of Mar 10, 2025 19:54:52 UTC – Details)

Product Description

Sprite by MedeaWiz

MedeaWiz Sprite 4K

MedeaWiz Sprite 4K Stacked Wiring Connections Rear Panel

Control Input / Output. Push button / trigger / serial input and serial outputAV output. Composite video, stereo audio left and rightOptical Audio OutputHDMI high definition video with audioPower input. Regulated 5 Volts DC only. Center positive

MedeaWiz Sprite 4K

Ultra High Definition Video Player

The MedeaWiz Sprite is a Ultra High Definition digital video repeater capable of 4K 2160p HDMI output. It has a direct trigger input and a 2-way communications serial port. The Sprite will loop a video when power is applied, play a different video on a trigger or serial command, and then go back to the looping video. The Sprite has no black space when looping or changing files. It will hold the last frame of video until the first frame displays.

In the Trigger Input mode, you can use a pushbutton, other dry contact, or voltage level change, with your choice of a High or a Low transition trigger. In the Serial Control Mode you can have a looping video and control other videos to play on command.

File Formats

The MedeaWiz Sprite 4K supports a wide range of file formats

Video File Formats

MPEG 1, 2 Up to 1920 x 1088, 30fps, 80Mbps, DAT, MPG, VOB, TS MPEG 4 Up to 1920 x 1088, 30fps, 38.4Mbps, AVI, MKV, MP4 v1, v2, v3 H.264 Up to 4096 x 2304, 60fps, 150Mbps, AVI, MKV, MP4, MOV,3GP, TS, FLV H.264 MVC Up to 4096 x 2304, 60fps, 150Mbps, MKV, TS H.265 HEVC Up to 4096 x 2304, 60fps, 150Mbps, MKV, MP4, MOV, TS Google VP8 Up to 1920 x 1088, 30 fps, 38.4Mbps, WEBM, MKV Google VP9 Up to 4096 x 2304, 60fps, 150Mbps, WEBM, MKV VC-1 Up to 1920 x 1088, 30 fps, 45Mbps, WMV, ASF, TS, MKV, AVI MJPEG, Motion JPEG Up to 1920 x 1088, 30fps, 38.4Mbps, AVI

Audio File Formats

MPEG 8kbps – 320kbps, 8khz- 48khz, layer 1, 2, 3, MP1, MP2, MP3 WAV 8khz – 48khz, MS-ADPCM, IMA-ADPCM, PCM WMA 8kbps – 320kbps, 8khz – 48 khz, version 4, 4.1, 7, 8, 9 OGG Q1 – Q10, 8khz – 48khz, OGG, OGA FLAC 8khz – 48khz, compress level 0 – 8 AAC 5.1 channel, 8khz – 48khz, ADIF, ATDS Header AAC-LC, AAC-HE, AAC-ELD AMR NB 4.75 – 12.2kbps@8khz, WB 6.60 – 23.85@16khz MIDI Type 0, 1, DLS version 1, 2, XMF, RTTTL/RTX, OTA, iMELODY Outputs AV out is 2 channel stereo. HDMI and Optical can support surround-sound.

Other File Formats

Photos JPG, JPEG, BMP, PNG, GIF, WEBP, 48 x 48 up to 8176 x 8176 Subtitles SRT, _A_S_S_, TXT, SUB, PGS Disk Format Most SD cards are formatted FAT32 and will allow up to a 4GB file size. You may re-format to exFAT or NTFS to use larger files. SD/USB SD card up to 512GB, 2x USB2.0 with no limit on external hard disk size.

The Sprite comes with:

Remote

IR Remote Control

We use a generic remote control that is used for various models of video repeaters and DVD players. Not all buttons / functions will respond, and some are only valid in certain modes. Most of our Customers will only use the remote for initial setup of the repeater. This is an IR control, and needs to be pointed directly at the front of the Sprite. The Sprite may respond to some other device’s IR remote in unwanted ways.

A/V Cable

AV cable, 3.5mm 4 pole to RCA

Use the Red RCA to send commands to the Sprite, the yellow RCA for the Sprite to report back to your control, and the white RCA for 5V power from the Sprite. We suggest you cover the unused RCA plugs with electrical tape to avoid shorting the power supply and burning the internal fuse. If you get a cable elsewhere, check to see that the wiring is the same. We have seen some cables where the red, yellow and white RCA are wired to different poles on the 3.5mm plug.

I/O Plug

I/O plug, 3.5mm 4 pole to screw terminals

The screw terminal adaptor shown above on the right is now included with the Sprite. The Sprite can supply 5 Volts DC on the I/O port for your micro-controller at up to 100 mA.

AC Adapter

AC adaptor, 100 to 240 Volt AC input, 5 Volt DC output

The Sprite is one of the most energy efficient ‘green’ video repeaters available. Using only 5 Volt DC power at an average of 500 mA, it takes only about 2.5 Watts to run. The Sprite requires a regulated 5 Volt DC power supply, which is included. The power connection takes a barrel plug with 1.35mm ID and 3.5mm OD, center Positive.

✅ POWERFUL & ENERGY EFFICIENT: Supports up to 2160p 4K 60Hz video. Using only 5 Volt DC power at an average of 500 mA, it takes only about 2.5 Watts to run
✅ EASY TO USE: On-Screen configuration menu. No programming required. Trigger by push button, voltage change or serial command.
✅ MULTIFUNCTION: Can play most types of digital files from microSD memory card or USB drive. It supports more than 30 popular video, audio and image formats
✅ CONVENIENT TO USE: There is no black space when looping or changing video files. Begins play when power is applied. No need to push buttons every time
✅ RELIABLE DESIGN: Built to last with long-life capacitors, passive cooling via heat-sink and aluminum case. Small size and light weight. Fits any space

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.