Glue-ups can be stressful, so anything you can do ahead of time to make them a little easier is worth doing. Today I want to share three workshop tips from the pages of Fine Woodworking magazine that you might want to add to your “go-bag” for gluing up.
No more stray bristles
In Fine Woodworking #266, Mike Cyr of Westport, Mass., wrote:
I buy cheap acid brushes in packs of 36 and use them for spreading glue. They work great but always seem to drop some bristles in the glue joint. I’ve tried hammering the base of the brush, but bristles still drop out. I recently found a better solution. Put just a drop of thin cyanoacrylate (CA) glue on both sides of the brush at the base of the bristles, and you won’t lose a single one. To apply the glue, hold up the brush at an angle so the glue doesn’t run down to the tip and harden all the bristles. The thin CA glue is like water, so don’t squeeze the bottle; just rub it along the bristles on both sides and let a little glue soak into the ferrule area. I have also used this on 1-in. and 2-in. chip brushes, and it works great every time.
I love this tip because I too like to buy cheap brushes and find myself frustrated trying to pick out lost bristles stuck in a freshly spread layer of glue. To take things one step further and to really gussy up my glue brushes, I like to take a chisel and trim down the length of the bristles, giving me a brush with a stiffer feel that I’ve found spreads glue more effectively.
A better brush for mortises
In Fine Woodworking #233, Charlie Morrison of Powell River, B.C., Canada, wrote:
I recently completed a project with a large number of mortise-and-tenon joints, all of which had to be glued more or less simultaneously. I made a simple glue applicator from a slim piece of hardwood and a 12-in. pipe stem cleaner (available at craft stores). Drill a small hole at the lower end of the stick, push a bit of the cleaner through it, and clinch. Wind the cleaner around the stick. Now drill another hole, push the tail end of the cleaner through it, and clinch. Just dip the applicator in the glue and spread it around. It works a lot faster than a brush, and the size can be customized to fit your mortises.
Clever glue-brush holder
In Fine Woodworking #230, Chip Ogg of Chittenden, Vt., wrote:
Those little metal-handled bristle brushes sold as flux or acid brushes make great glue brushes. They spread the glue evenly and cost about a dime apiece. If you’re not careful where you leave the brush, though, you can wind up with a trail of unwanted glue spots on your work or your workbench.
I solved that problem by taping a small rare earth magnet to my glue bottle to hold the brush there temporarily during assembly. It avoids the mess and keeps the brush handy. The brushes are also reusable if you rinse them in water when you’re done.
4-oz. Glue Bottle – 3 Pack
While this bottle may look and act like a condiment bottle, it’s really a perfect glue bottle. The screw-top lid won’t get lost and after a year of using it, Ben hasn’t had any problems with clogging.
Price: $6.99 at the time of writing
A 3D-printed glue caddy
In this edition of “Anything you can do I can do better,” I decided to 3D-print a riff on this idea that I think takes everything one step further. I modeled a glue bottle/brush holder in Fusion 360, and it’s quite honestly made me a little too happy. I’ve always found smaller glue bottles easier to deal with—anything between 2 oz. and 4 oz. is perfect for me. For the past few months, I’ve been experimenting with a 4-oz. condiment bottle I bought online. While I do like an even smaller bottle more, I think the screw-top lid on my new bottle is worth the trade-off, and it’s time to commit to it as my go-to bottle. The 3D print holds the bottle and has a hole to put an acid brush in for storage. But most importantly, it has a trough to suspend the glue brush over with a magnet to hold it in place. Download the STL file and print one for yourself.
Gluing and Clamping Strategies
How to Glue and Clamp a Picture Frame
Easy Way to Glue up Panels
Sign up for eletters today and get the latest techniques and how-to from Fine Woodworking, plus special offers.
